Laserfiche WebLink
<br /> -44- <br /> 4. Any use of property that does not meet the <br /> required minimum lot size; front,. side and <br /> rear yard dimension; and/or lot w1dth; or <br /> exceeds the maximum height, building coverage <br /> or density per gross acre as required. <br /> D. Area requirements: <br /> 1. Minimum lot area: <br /> a. Interal: 6,000 square feet. <br /> b. Corner: 7,500 square feet. <br /> 2. Minimum lot frontage on a public street: <br /> a. Internal: 50 feet <br /> b. Corner: 60 feet <br /> 3. Minimum lot depth: 100 feet <br /> 4. Minimum depth of front setback: 0 feet <br /> 5. Minimum depth of rear setback shall be five ( 5) <br /> feet with an additional two (2) feet required <br /> for each story above twenty-four (24) feet, up <br /> to a maximum setback of twenty-five (25) feet. <br /> There shall be no encroachment or overhangs into <br /> this required rear yard. <br /> 6. Minimum width of side setback: <br /> a. Internal lot: 0 feet <br /> b. Corner lot: 0 feet <br /> 7. Maximum building coverage as a percentage of <br /> lot area: 85 per cent. <br /> 8. Maximum accessory building coverage as a <br /> percentage of rear yard: 30 per cent. <br /> 9. Maximum height of structures: N/A <br /> Section 32. 1-1 (LI) Light Industrial District. <br /> A. Purpose: The Light Industrial District is <br /> established for the following purposes: <br /> 1. To provide sufficient space for the development <br /> of commercial establishments which would involve <br /> influences that would be objectionable in the <br /> other commercial districts due to noise from <br /> heavy service operations, large volumes of truck <br /> traffic, or some similar objection. <br /> 2. To accommodate wholesale and warehouse activities <br /> and industrial operations whose external physical <br /> effects are restricted to the area of the districts <br /> and in no manner affect in a detrimental way any <br /> of the surrounding districts. <br /> 3. To permit, along with any specified uses, the <br /> manufacturing, compounding, processing, packaging, <br /> assembly and/or treatment of finished or semi- <br /> finished products from previously prepared <br /> material as long as such use has no adverse <br /> external effects such as noise or odor which <br /> extend beyond the property lines of the site. <br /> 4. To protect against fire and explosions, pollution, <br /> and other environmental hazards. <br />