Ord 2016-026/amending the Official Zoning Map of the City by rezoning 83.657 acres of land, more or less, being Blocks A, B and E out of the Blanco Riverwalk Subdivision, located on the west side of North IH-35 between Carlson Circle and Yarrington Road f

Home Browse Search

walkways with a roof covering, window accents. Use of any other material shall be approved through the 10% Director approved additional material request or a conditional use permit as detailed in Section 1(g) of this PDD. b.In industrial districts, a minimum of 70% of each building wall shall be of Primary Materials and up to 30% of each building wall may be of Secondary Materials. 1.A request for an additional 10% of Secondary Materials or 10% Alternative Materials may be considered by the Director. 2.Primary Materials: Brick, Stone, Stucco, Rock, Marble, Granite, Concrete Tiltwall, a Combination of Glass and Steel Framework. 3.Secondary Materials: Wood, Architectural Metal, Glass Block, Tile. 4.Other Materials: Cementitious Fiber Board may only be used for covered balconies, porches, patios, fascia, soffits, interior portions of covered stairways, breezeways, hallways, corridors, walkways with a roof covering, window accents. Use of any other material shall be approved through the 10% Director approved additional material request or a conditional use permit as detailed in Section 1(g) of this PDD. Exterior Design Requirements for Buildings. e. 1.Applicability. The standards and criteria contained within this section are deemed to be minimum standards and shall apply to all exterior building walls of all new construction and to all new additions to existing buildings. Where alterations, remodeling or repairs result in an expansion of over 50% of the gross floor area of the existing structure, the standards and criteria within this section shall apply to the entire structure. These standards apply to all nonresidential and Industrial buildings within the City, as defined by Chapter 4, Article 2 of the Land Development Code. 2.Exemptions. The following properties are exempt from standards applied to exterior building design: a.Property located within the airport; b.Residential uses other than multi-family; 3.General Design Standards. The design of all applicable properties shall utilize at least three of the five listed design elements found in the Technical Manual. Each design element includes multiple techniques for achieving compliance. The Director shall have all plans reviewed to assure the adequacy and application of these design elements to meet the purposes of this Land Development Code. a.Design Requirements for Specific Types of Structures.