Ord 2016-025/revisions to Chapters 4 and 8 of the City’s Land Development Code to incorporate Commercial, Industrial and Public Material Standards

Home Browse Search

accents. Use of any other material shall be approved through the 10% Director approved additional material request or a conditional use permit as detailed in Section 4.4.2.4. 2) In industrial districts, a minimum of 70% of each building wall shall be of Primary Materials and up to 30% of each building wall may be of Secondary Materials. a. A request for an additional 10% of Secondary Materials or 10% Alternative Materials may be considered by the Director. b. Prinuny Materials: Brick, Stone, Stucco, Rock, Marble, Granite, Concrete Tilt wall, a Combination of Glass and Steel Framework. C. Sec•ondatl, Matericils: Wood, Architectural Metal, Glass Block, Tile. d. Other Materials: Cementitious Fiber Board may only be used for covered balconies, porches, patios, fascia, soffits, interior portions of covered stairways, breezeways, hallways, corridors, walkways with a roof covering, window accents. Use of any other material shall be approved througli the 10% Director approved additional material request or a conditional use permit as detailed in Section 4.4.2.4. Section 4.4.2.2 Exterior Design Requirements for Buildings (a) Applicability. in - older -to ensure the- oesthetie Yalue and vist .� appeUl Of the — t6— FE'SWIE'nA.-S A—Rd to ViliitOFS and potential busifi2Y'.ies, the standards and er-iteria eontained within this W068ft aFe established as fninimufn The standards and criteria contained within this section are deemed to be minimum standards and shall apply to all exterior building walls of all new construction and to all new additions to existing buildings. Where alterations, remodeling or repairs result in an expansion of over 50% of the gross floor area of the existing structure, the standards and criteria within this section shall apply to the entire structure. These standards apply to all eenstp etio ' (new, altefea or. r-epair-ed if more than 500% of the pfeper-t)gs eufFeat value) or- multi family, residential nonresidential properties and Industrial buildings within the City., as defined by Chapter 4, Article 2 of the Land Development Code and to all buildings located within the T5 Zoning District as defined in Subpart C, San Marcos SmartCode. (b) Exemptions. The following properties are exempt from standards applied to exterior building design: