Laserfiche WebLink
B. A required buffer must be located within the outer perimeter of the lot,parallel to and extending to the <br /> property boundary line. A required buffer must be provided along the entire frontage immediately <br /> abutting the property line. Landscaping must be planted on the inside of the required buffer. <br /> C. A required buffer may not be located on any portion of an existing, dedicated or reserved public <br /> right-of-way. <br /> D. Breaks for pedestrian and bicycle access are allowed. Walkways must cross a buffer at as near a <br /> perpendicular angle as practical. <br /> E. The width of a required buffer is calculated on the average width per 100 feet or portion of buffer. <br /> The minimum width of the buffer at any one point cannot be less than one-half the required width of <br /> the buffer. <br /> F. The parking of vehicles and the placement of buildings or structures, except for walls, fences and <br /> landscaping is not allowed in a required buffer. <br /> G. No building or structure on the subject site may be located closer than 10 feet to a required buffer. <br /> H. In lieu of a required wall or fence, a natural or man-made grade separation of a least 6 feet in <br /> elevation may be provided. <br /> a. The developing property must be located at an elevation lower than the property to be screened. <br /> b. The stabilized side slopes of the grade change may be no greater than 3:1. <br /> I. Figures illustrating Buffering requirements are located on page 31 of this Agreement <br /> 30 <br />