Laserfiche WebLink
ARTICLE IX <br /> ARCHITECTURAL DESIGN <br /> Section 9.01 Architectural Design. All single-family residential development within District Land shall <br /> comply with City Codes pertaining to architectural design except as specified below and as modified by the <br /> Development Enhancements and Waivers contained in Exhibit C. <br /> A. Exterior Construction and Design Requirements. In order to generate enhanced architectural design and <br /> ensure land use compatibility the following architectural design requirements shall apply: <br /> B. Residential Variation. In order to generate more diverse and vibrant neighborhoods, the following standards <br /> shall apply on all single-family lots: <br /> 1. A separation of at least 4 lots shall be maintained for any floor plan with repeating elevations. <br /> 2. Each block face shall contain variety in roof shape/structure design. Variety shall be achieved through <br /> the use of gabled roofs, hipped roofs, dormered roofs or gambrel roofs. Additional variation may be <br /> achieved with gabled roofs by employing a mix of front/rear facing gabled roofs and side facing gabled <br /> roofs as the predominant roof structure type. <br /> 3. Each block face shall contain a mix of homes with varied colors. A minimum separation of at least 3 units <br /> shall be maintained between repeating houses with similar paint color. Color variation may be achieved <br /> through a change in primary material. <br /> 32 <br />