Ord 2017-056/establishing standards for permitting, design, installation, inspection and operation of Small Cell Network Infrastructure in City ROW or on City infrastructure

Home Browse Search

Sec. 74.214 Installation and Inspections. (a) A network provider shall, at its own cost and expense, install the network node, network node facilities, node support poles and related ground equipment in a good and workmanlike manner in accordance with this article. All work done in connection with the installation, operation, maintenance, repair, modification, or replacement of the network node, network node facilities, node support poles and related ground equipment shall be in compliance with all applicable laws, ordinances, codes, rules and regulations of the city, state and federal government. (b) The City may perform visual inspections of any network node, network node, node support pole or related ground equipment located in the right-of-way as deemed appropriate without notice. If the inspection requires physical contact with the network node, node support poles or related ground equipment, the city shall provide written notice to the network provider within five business days of the planned inspection. The network provider may have a representative present during the inspection. (c) After completion of the work within the right-of-way, the network provider shall provide to the city copies of maps and construction records of the permitted facilities as they are actually constructed in the right-of-way and shall provide additional copies of the maps and records to the city upon request. City. Sec. 74.215 Collocation. A network provider shall collocate network nodes on poles pursuant to an agreement with the Sec. 74.216 Replacement, Maintenance and Repair. (a) A network provider shall provide the city with ten days advance written notice of the following activities in the right-of-way: (1) Routine maintenance that does not require excavation or the closing of sidewalks or vehicular lanes; (2) Replacement or upgrading a network node or pole with a network node or pole that is substantially similar in size or smaller and that does not require excavation or the closing of sidewalks or vehicular lanes; and (3) The installation, placement, maintenance, operation, or replacement of network nodes that are strung on cables between existing poles or node support poles in compliance with the National Electrical Safety Code. (b) A network provider shall comply with the requirements of this chapter and all other applicable codes and ordinances, when installing, replacing, maintaining, repairing, upgrading, removing, relocating or operating network nodes, network node facilities, node support poles and related ground equipment.