Res 2022-114R/awarding a construction contract to Western Specialty Contractors through the Omnia Cooperative Purchasing Program for the Activity Center Wall Coating Project

Home Browse Search

PROPOSAL/CONTRACT Joshua Farrell City of San Marcos 2217 East McCarty Lane San Marcos, TX, 78666 February 3, 2022 WE (Western) HAVE PREPARED A PROPOSAL FOR: City of San Marcos Activity Center Wall coating l OMNIA # TX- R 180903-31853 SCOPE OF WORK: We propose to furnish and install all necessary labor, materials, equipment, supervision, and insurance, as shown on the attached insurance addendum, to complete the following: 1. Mobilization : • Mobilization will consist of the time necessary to properly mobilize and demobilize the project. Also included is the time necessary for the proper supervision to manage the project and the necessary equipment and material to assist in the mobilization and supervision of the project. • BARRICADE RIBBON / BARRICADE FENCING: Temporary barricades will be installed to close off the work area while performing our work. The pedestrian and vehicular barricading will be limited to orange or yellow barricade ribbons, as well as, the necessary signs to enclose our work area. 2. Sealant: • We will remove approximately 1150 lineal feet of existing sealant, lightly grind the joint edges to remove loose residual sealant and place a new single component urethane sealant. The sealant color will be as chosen from the manufacturer's standard color chart. Primers will be used as directed by the product manufacturer based on substrate type. 3. Wall Coating: • WATERBLASTING: Concrete surfaces shall be cleaned using high pressure water (minimum 3,000 psi water blaster shall be utilized). A test sample may be required to determine if adequate cleaning results are obtained. If additional cleaning methods are required, this work will be performed at an additional price. • WALL COATING: Approximately 30,000 square feet of substrate will be coated with 2 coats of "Weatherlastic" elastomeric coating. The coating will be scrubbed in using a brush to force the product into the pores of the substrate. The coating will be applied at approximately 100 square feet per gallon and/or according to the manufacturer's recommendations. A color sample will be selected from standard colors and a sample will be approved by the owner prior to the start of our work. TOTAL: $151,800.00 No Tax Included, Optional P&P Bond Add $2881.03 to Total.