Res 2004-135 - Laserfiche WebLink

Home Browse Search

and for the cost of all Make-Ready Work associated with the Permit. The Licensee may proceed to make the Attachments covered by the Permit only after the Permit is issued. 6.09. If the Licensee does not make the Attachments authorized by a Permit within 30 days ofthe issuance of the Permit, the City may revoke the permit for the Attachments, unless the Licensee gives notice to the City within the 30 days that the particular circumstances require an additional 30 days. In instances where the City revokes a permit under this provision, the City will endeavor to make other space available to Licensee, upon written request, as soon as reasonably possible. ARTICLE 7. MAKE-READY WORKIINSTALLATION OF ATTACHMENTS BY LICENSEE 7.01. In the event the City determines that Make-Ready Work is necessary to accommodate Attachments for which the Licensee has applied for a Permit, the City will advise the Licensee of the estimated costs of the Make-Ready Work. 7.02. The City at its discretion may require prepayment of the cost of Make-Ready Work. When prepayment is not required by the City, the Licensee will pay the City's the cost of the Make- Ready Work upon completion and before the Permit is issued. 7.03. Unless the City specifically determines otherwise in connection with a particular application, all Make-Ready Work will be performed only by the City or by a contractor authorized by the City to perform the work. 7.04. In performing all Make-Ready Work to accommodate the Licensee's Facilities, the City will endeavor to include the work in the City's normal work schedule. If the Licensee requests that Make-Ready Work be performed on a priority basis or outside of the City's normal work hours, the Licensee agrees to pay any resulting increased costs. Whether to prioritize a particular request of the Licensee, however, will be in the City's sole discretion. 7.05. The Licensee will perform all of its installation, removal and maintenance work, whether by its own personnel or by contractors 1) at the Licensee's sole cost and expense, 2) in a good and workmanlike manner, 3) in accordance with the Technical Specifications and the Applicable Standards; and 4) in a manner that does not adversely or materially affect the structural integrity of the Poles, any City Facilities, or any facilities or equipment of Other Licensees. 7.06. The Licensee will ensure that any person installing, maintaining, removing or performing any work on the Licensee's Facilities is duly qualified and familiar with the Applicable Standards. 7.07. In the event a Permit application of the Licensee is approved that requires Make-Ready Work, and the Licensee withdraws the application after the City commences any necessary engineering, administrative or field work for the Make-Ready Work, the Licensee will pay the City for all costs incurred by City until the time the City receives notice of the cancellation. 9