Laserfiche WebLink
VINTAGE SAN MARCOS <br />PLANNED DEVELOPMENT DISTRICT <br />SITE DEVELOPMENT STANDARDS <br />COMPARISON CHART <br />2.3 Development Standards MF-24 Code PDD <br />Lot/Parcel Area, Minimum S q. Ft. 12,000 Per code <br />Lot/Parcel Area, Maximum Acres N/A Per code <br />Units per acre, Maximum /Gross <br />Acres 24 Maximum 95 <br />Lot Frontage Minimum Feet 60 Per code <br />Lot Width, Minimum Feet 60 Per code <br />Front Yard Setback, Minimum Feet 25 5 <br />Side Setback, Minimum Feet, Interior 10 5 <br />Side Setback, Minimum Feet, Corner 15 5 <br />Rear Yard Setback, Minimum Feet 10 5 <br />Lot Depth, Minimum Feet 100 Per code <br />Impervious Cover, Max % 75% 90% <br />Building Height, Maximum Feet 45 80 <br />3.0 Building Materials and Design <br />Code <br />PDD <br />• <br />Permitted Wall Materials: Materials will be 100% masonry and consist of the <br />Rustic wood (rough sawn) following: <br />Stucco/EFIS <br />Brick Stucco - 50% <br />Stone Brick- 20% <br />Stained or painted wood Stone- 5% <br />Glass, if 50% or less of fagade Cementacious Fiberboard- 25% <br />Cementacious fiberboard (Hardiplank) <br />Custom-treated tilt wall The fagade will be composed of no more than 50% <br />Decorative, textured or split-face concrete block glass. <br /> Percentages of each material areapproximate. <br />Permitted Roof Materials: <br />Copper Code compliant. <br />Metal sheet roofing <br />Tile <br />Commercial flat (built up) roof <br />Composition roof <br />Exterior Design of Buildings: Exterior building design will be 100% masonry and <br />Three (3) of the following design elements and their consist of the following: <br />qualifying techniques are required: <br /> • A combination of pitched roofs and flat <br />a) Use of one of the following methods for roofs with parapets will be incorporated to <br />horizontal offsets in exterior building achieve vertical articulation. <br />walls: • Off-sets and step-backs will be <br />1) Provide fagade articulation of at incorporated to provide horizontal <br />least three (3) feet in depth for articulation. <br />every fifty (50) feet in horizontal • Change of building materials and massing <br />is <br />-1-