Ord 2010-048 - Laserfiche WebLink

Home Browse Search

ARTICLE 6. PLUMBING CODE DIVISION 1. GENERALLY Section 14.101. Applicability. All city plumbing regulations apply throughout the city limits, and also apply to all plumbing work, regardless of location, performed on pipes connected to the city water or wastewater system. Section 14.102. Amendments. The 2009 International Plumbing Code adopted by section 14.002 is amended as follows: Section 103 is deleted. Section 106.3 is deleted. Section 106.6 Fees, is deleted Section 109 is deleted. Section 501 is amended by adding 501.9 to read as follows: 501.9. Before any water heater is installed, the person installing the water heater must receive a permit from the building inspections department. Section 603.2 is amended by deleting exception 2. Section 606.1 is amended by adding 606. 1.1 to read as follows: 606.1.1. Water Supply Control. A customer shutoff valve shall be provided on the customer's premises immediately following the water service meter. The shutoff valve shall be located and accessible in a valve box with a readily removable access cover which extends to grade level. When drain valves are provided on the distribution piping or other portion of the water supply system, the drains shall be above grade or otherwise located to prevent the possibility of backflow into the piping system after the system has been drained. Section 703 is amended by adding 703.6 to read as follows: 703.6 Minimum building sewer size. Any building sewer pipe which extends five feet from the structure and is connected to the sewer tap, shall be four inches in diameter, schedule 40 PVC or SDR 26 gasket joint pvc. Section 916.1 is amended by adding 916. 1.1 to read as follows: