Ord 2001-077 - Laserfiche WebLink

Home Browse Search

(1) Sitc boundaries including all bearings and distances, with any relevant recharge zone boundaries clearly labeled. (2) Topography and drainage plan of the entire site at t'lIO foot contour intervals. (3) The centerline of all rivers, creeks, streams or drainage areas that drain an area greater than 50 acres. ( 1) The location of all floodways and 100 year floodplain as shown on flood insurance rate maps or as calculated using acceptablc engineering standards. (5) The location of all sensitive features on the site as identified m the geologic assessment. (6) The location and dimensions of all critical water quality zones and water quality transition zones, if applicable. (7) A survey of all trees 10 caliper inches in diameter and greater, as measured four feet above the ground. On sites greater than ten acres, a digital aerial photograph may be superimposed on the development plat in lieu of an on the ground tree survey. (8) The location and dimensions of all existing improvements on thc propcrty including all existing impervious cover such us driveways, parking areas, buildings and similar structures. (9) lJl proposed improvements on the property including all proposed impervious cover such as driveviays, parking areas, buildings and similar structures. (10) The drainage patterns and approximate slopes anticipated after major grading activities, as dctermined by a Texas licensed professional engineer. (11) Idcntification of all areas v.rhere soils "vill be disturbed, and all areas ','{here soils will not be disturbed. (12) A table of summary information that includes the following: (A) The total acreage of the site. (B) The area and percentage of existing impervious cover, by type. (C) The area and percentage of proposed impervious cover, by type. (D) The total area and pcrccntagc of impervious cover by type. (13) The location and type of all proposed temporary BMPs. C:\TEMP\Edwards Regulations revision final.doc 23