Res 1990-114 - Laserfiche WebLink

Home Browse Search

Page 4 of 5 Pages 11. The Sponsor agrees to perform the following: a. Furnish a construction management program to FAA prior to the start of construction which shall detail the measures and procedures to be used to comply with the quality control provisions of the construction contract, including, but not limited to, all quality control provisions and tests required by the Federal specifications. The program shall include as a minimum: 1. The name of the person representing the sponsor who has overall responsibility for contract administration for the project and the authority to take necessary actions to comply with the contract. 2. Names of testing laboratories and consulting engineer firms with quality control responsibilities on the project, together with a description of the services to be provided. 3. Procedures for determining that testing laboratories meet the requirements of the American Society of Testing and Material's standards on laboratory evaluation, referenced in the contract specifications (D 3666, C 1077). 4. Qualifications of engineering supervision and construction inspection personnel. 5. A listing of all tests required by the contract specifications, including the type and frequency of tests to be taken, the method of sampling, the applicable test standard, and the acceptance criteria of tolerances permitted for each type of test. 6. Procedures for ensuring that the tests are taken in accordance with the program, that they are documented daily, that the proper corrective actions, where necessary, are undertaken. b. Submit at completion of the project, a final test and quality control report documenting the results of all tests performed, highlighting those tests that failed or did not meet the applicable test standard. The report shall include the pay reductions applied and reasons for accepting any out-of-tQlerance material.