Laserfiche WebLink
Lot Depth, Minimum: 100 feet <br />Lot Frontage, Minimum 50 feet <br />Front Yard Setback, Minimum: 10 feet <br />Side Yard Setback, Interior, Minimum: 5feat <br />Side Yard Setbaok, Comer, Minimum: 10 feet <br />Rear Yard Setbaoh, Minimum: 5femd <br />Building Height, Maximum: N/A <br />Impervious Cover, Maximum: 8096 <br />9. Development <br />To encourage cluster development within the Project, the following limitations on the location <br />of the above residential lot types shall be applicable: <br />Slope Limitations <br />Slope Gradient <br />Lot Types Permitted <br />- <br />Single Family Residential Estate Lots <br />Single Family Residential Rural Lots <br />0% to 15% <br />Single Family Residential Manor Lots <br />Single Family Residential Cottage Lots <br />Garden/Patio Home/Zero Lot Line Homes <br />Townhouse Residential Lots <br />Single Family Residential Rural Lots <br />15% to 25% <br />Single Family Residential Manor Lots <br />Single Family Residential Cottage Lots <br />Garden/Patio Home/Zero Lot Line Homes <br />Single Family Residential Estate Lots <br />Over 25% <br />Single Family Residential Rural Lots <br />,Ppqn Space and Conservation Areas <br />D. Phasing A phasing plan shall be submitted with a Subdivision Concept Plat to ensure orderly <br />development of the Project. Any portion of the Property developed as MF -24, Multiple -Family <br />Residential District in accordance with Section 1.04.A.3 above shall be developed in a minimum <br />of two phases with the first phase to be no more than 360 units and any subsequent phases shall <br />be deferred until after such first phase is complete and at least 75% occupied and at least 200 <br />single-family homes have been completed and occupied. <br />E. Architecture and the built environment are important elements <br />to the development of the Project. Due to the importance of these e|emento, all architectural <br />styles should produce a cohesive visual framework while maintaining architectural variety. All <br />architecture should reflect high quality and craftsmanship, both in design and construction. The <br />use of unusual ahmpes, oo|nru, and other characteristics that cause disharmony should be <br />avoided. A Texas Hill Country style should be reflected through the use of natural materials and <br />textures. <br />Achieving o high quality of architectural design for all buildings within the Development is <br />considered aprincipal goal ofthese design standards. /\ variety oflot and dwelling types within <br />the neighborhood should be encouraged. Careful design of neighborhood can mix different <br />housing types and price ranges. Reflecting the vision of the Pnojemt, these development <br />standards call for exterior materials that express the natural environment and range of natural <br />materials found inCentral Texas. <br />The Owner shall record deed restrictions regulating the development of the Property which deed <br />restrictions shall incorporate the standards and requirements of this section E. The deed <br />restrictions shall be enforceable by a homeowner's association created by the Owner and shall <br />7 <br />