Laserfiche WebLink
ARTICLE IX <br />ARCHITECTURAL DESIGN <br />Section 9.01 Architectural Design. All single-family residential development within District Land shall <br />comply with City Codes pertaining to architectural design except as specified below and as modified by the <br />Development Enhancements and Waivers contained in Exhibit C. <br />A. Exterior Construction and Design Requirements. In order to generate enhanced architectural design and <br />ensure land use compatibility the following architectural design requirements shall apply: <br />B. Residential Variation. In order to generate more diverse and vibrant neighborhoods, the following standards <br />shall apply on all single-family lots: <br />1. A separation of at least 4 lots shall be maintained for any floor plan with repeating elevations. <br />2. Each block face shall contain variety in roof shape/structure design. Variety shall be achieved through <br />the use of gabled roofs, hipped roofs, dormered roofs or gambrel roofs. Additional variation may be <br />achieved with gabled roofs by employing a mix of front/rear facing gabled roofs and side facing gabled <br />roofs as the predominant roof structure type. <br />3. Each block face shall contain a mix of homes with varied colors. A minimum separation of at least 3 units <br />shall be maintained between repeating houses with similar paint color. Color variation may be achieved <br />through a change in primary material. <br />