Laserfiche WebLink
• SECTION 29. Section 7.4.2.5 Driveway Site Layout and Construction Standards, is <br />hereby amended by inserting the following Table 7-1 which is referenced but unintentionally <br />omitted from the current ordinance: <br />Table 7-1: Two-Way Driveway Standards <br />is <br /> Curb Minimum <br /> <br /> Type of Spacing <br />Driveway Development Width ft Radius (ft) Between <br /> Min. Max. Min. Max. Drives <br /> Single- <br />Family 10 <br />- 20 <br />- 5 <br />- 5 <br />- 10 <br />- <br /> Duplex and <br /> <br />Tvpe I <br />Townhomes 15 <br />- 25 <br />- 5 <br />- 10 20 <br /> Multi- <br />Resident <br />Apartments <br />24 <br />30 <br />5 <br />10 <br />20 <br /> Office, <br />Commercial, <br /> <br />and Parking 24 <br />- 35 <br />- 10 <br />- 15 <br />- 20 <br />- <br /> Lots <br /> Industrial 24 45 10 15 20 <br />Type II Banks, <br />Service <br />Stations, and <br /> <br />1/3 x <br /> Convenience 25 45 <br />- 10 <br />- 15 <br />- Frontage <br /> Stores With <br /> Fuel Pumps <br />SECTION 30. Section 7.5.1.7, Calculation of Impervious Cover, is hereby amended to <br />read as follows: <br />Section 7.5.1.7 Calculation of Impervious Cover <br />(a) Under this Article, roads, sidewalks, parking areas, buildings and other <br />impermeable construction covering the natural land surface shall be considered as <br />impervious cover. To die estimate the percent of impervious cover created by the <br />development of a parcel or tract of land, the following methods should be used: <br />(1) Roadways (except cul-de-sacs): <br />(Wr + 2Wc) x (If) = square feet <br />Where: <br />. width of roadway <br />pavement