Laserfiche WebLink
5) Asphalt/Pavement <br />a) Perform laboratory compaction tests of base materials to determine their moisture content <br />versus dry density relationships; <br />b) Perform compaction tests on aggregate base material; <br />c) Measure thickness of base materials for compliance with project requirements; and <br />d) Obtain core samples of the in-place bituminous concrete pavement and verify <br />proper thickness and density of the pavement materials. <br />6) Structural Steel <br />a) Inspect structural steel on a periodic basis during erection; <br />b) Visually inspect representative welds in general accordance with AWS 131.1; and <br />c) Inspect high strength bolted connections with a calibrated wrench in accordance with <br />AISC specification. <br />7) NPDES Inspections <br />Provide engineering technicians to observe and monitor the installation and maintenance of <br />the construction site's surface water erosion controls, as required by the construction plans and <br />NPDES permit requirements. <br />8) Reporting Services <br />Report the results of our field and laboratory tests to other members of the construction team, <br />as you request. <br />The Consultant's services do not include supervision or direction of the actual construction <br />work. Neither the presence of the Consultant's field representative nor the observation and <br />testing by the Consultant will imply the Consultant's responsibility for defects discovered in the <br />construction work. It is understood that the Consultant will not be responsible for job or site <br />safety on this project. Job site safety will be the sole responsibility of others. The words <br />"inspection" and "verify" are used to mean observation of the work and the conducting of tests <br />by the Consultant to determine substantial compliance with plans, specifications and design <br />concepts. <br />Additionally, the services proposed herein are conventional in nature and do not include any special <br />services that may lessen the risk of conditions that can contribute to moisture, mold or other microbial <br />contaminate amplification in buildings. The City understands that mold is abundant throughout <br />nature and is comprised of a wide variety of microscopic fungi. Due to its nature, the potential for <br />mold infestations cannot be completely eliminated. However, the Consultant offers a wide array of <br />professional Moisture, Waterproofing, Roofing and Indoor Air Quality/Mold Consulting services that <br />can help minimize the likelihood of future occurrences which are available to the City as additional <br />services. If requested by the City, the Consultant will submit a proposal for these additional services <br />under a separate cover for the City's review and authorization. <br />4