Res 2001-090 - Laserfiche WebLink

Home Browse Search

Section 6.05. Upon receipt of a properly completed application, including any required Pre-Permit Survey, the City will review the application within a reasonable period of time, and discuss any issues with the Licensee, including engineering or Make-Ready Work requirements associated with the application. The City's acceptance of application documents or issuance of a Permit will not relieve the engineer or the Licensee of full responsibility for the safe and proper installation of the Attachments covered by the Permit. Section 6.06. If the City determines that Make-Ready Work is required to accommodate any Attachment of the Licensee, the City or its contractors will perform the work under Article 7. Section 6.07. If the City receives Permit Applications for the same Pole from the Licensee and one or more Other Licensees within 30 days of one another, and accommodating the requests may require replacement or modification of the Pole or rearrangement of existing Attachments, the City will follow the procedures of Article 9 in reviewing the applications. Section 6.08. If the Licensee has not pre-paid the City for Make-Ready Work associated with an application, then upon completion of the Make-Ready Work, the City will bill the Licensee for all costs of the work. The City will issue a Permit only after the Licensee pays the City all fees and for the cost of all Make-Ready Work associated with the Permit. The Licensee may proceed to make the Attachments covered by the Permit only after the Permit is issued. Section 6.09. If the Licensee does not make the Attachments authorized by a Permit within 30 days of the issuance of the Permit, the City may revoke the permit in accordance with Section 12.02. In such instances, the City will endeavor to make other space available to the Licensee, upon written request, as soon as reasonably possible. ARTICLE 7. MAKE-READY WORK/INSTALLATION OF ATTACHMENTS BY LICENSEE Section 7.01. In the event the City determines that Make-Ready Work is necessary to accommodate Attachments for which the Licensee has applied for a Permit, the City will advise the Licensee of the estimated costs of the Make-Ready Work. Section 7.02. The City at its discretion may require prepayment of the reasonable cost of Make- Ready Work. When prepayment is not required by the City, the Licensee will pay the City's reasonable cost of the Make-Ready Work upon completion and before the Permit is issued. Section 7.03. Unless the City specifically determines otherwise in connection with a particular application, all Make-Ready Work will be performed only by the City or by a contractor authorized by the City to perform the work. Section 7.04. In performing all Make-Ready Work to accommodate the Licensee's Facilities, the City will endeavor to include the work in the City's normal work schedule. If the Licensee requests that Make-Ready Work be performed on a priority basis or outside of the City's normal work hours, the Licensee agrees to pay any resulting increased costs. Whether to prioritize a particular request of the Licensee, however, will be in the City's sole discretion. 8 C:\TEMP\Fiber America pole att.doc