Res 2002-195 - Laserfiche WebLink

Home Browse Search

1.2.18 Review the preliminary engineering letter report with the City and obtain concurrence before proceeding to the final design phase. 1.2.19 Head the Project team and coordinate the integration of design, surveying, right of way issues, permitting, and other services as previously approved. 1.3 PHASE 2 - FINAL DESIGN 1.3.1 Attend a meeting with the City to confirm the design parameters for the project. 1.3.2 Perform routine coordination with the City to obtain concurrence on plan preparation. The Engineer will also conduct up to six monthly coordination meetings with the City to define and address any issues identified relative to the Project. The Engineer anticipates that a total of six (6) meetings will be required. 1.3.3 Prepare final lift station hydraulics and hydraulic design of force main and gravity mains. 1.3.4 Perform civil and mechanical design of the lift station in accordance with applicable City and State requirements. The Engineer will prepare plans for proposed facilities including civil and mechanical site plans for the lift station, mechanical plan and sections, and miscellaneous details. 1.3.5 Perform detailed structural design of the lift station. The Engineer will prepare plans for proposed facilities including structural plan and section and structural construction details. 1.3.6 Perform electrical design of the lift station in accordance with applicable City and State requirements. The Engineer will prepare plans for proposed facilities including an electrical site plan, standby generator design, SCADA, control schematics, and electrical details. The Engineer anticipates that the primary electrical service for the lift station, including the distribution system, pole mounted cut-out fuses, current transformers, watt hour meters and main disconnect breakers will be furnished and installed by others. The Engineer will include provisions for the automatic transfer of power from the primary (normal) electrical service to the secondary (backup) electrical service for the lift station as a component of the Project. 1.3.7 Prepare detailed plan and profile drawings for the force main and gravity interceptor detailing size, depth, routing, and construction details at minimum scales of 1 "=50' horizontal and 1" = 5' vertical. The Engineer assumes, for the purposes of this Agreement, that 2,250 linear feet of new dual 12114-inch force main and 6,500 linear feet of new 24-inch gravity main will be required. 1.3.8 Meet with TxDOT to coordinate construction of proposed improvements in TxDOT's rights- of-way. The Engineer will prepare and submit permit applications to TxDOT to construct pipelines in their rights-of-way where applicable, and for applicable bores. 1.3.9 Prepare a Storm Water Pollution Prevention Plan ("SWPPP") and prepare notification forms 4